Home / Products / Extinguishers and equipment / Fire equipment and safety signage
Pumps · hoses · cabinets · turnout gear · signageFire equipment and safety signage
The whole system, from the fire pump to the assembly point sign — one order, one supplier
Fire pump sets
Design and installation are worked out from the type of business, organisation, building or plant, against the design standards required by law. This work always needs a site visit and the building drawings first — there is no off-the-shelf version.
DELTA fire hose
Red three-layer synthetic PVC/nitrile rubber fire hose
- Seamless woven construction with all three layers bonded as one
- Outer layer of nitrile/PVC with a ribbed profile along its length, resistant to abrasion
- Middle layer woven from polyester, tough and highly flexible
- Inner layer withstands water hammer, is unaffected by seawater and stands up well to ozone in the atmosphere
- Available in 1.5 in and 2.5 in, in 20 m and 30 m lengths
- Supplied with quick-connect couplings in brass or aluminium
- Manufactured to BS 6391 Certified by ISO 9001:2000
Nozzles and couplings
- 2.5 in adjustable fog nozzle (NH thread)
- 2.5" × 12" straight-stream and fog nozzle, quick-connect
- 2.5" × 12" straight-stream nozzle, quick-connect
- 1.5" NH brass hose rack nozzle, UL/FM listed, fog and straight stream
- 1.5" NH hose rack nozzle in red rigid plastic, UL/FM listed
- 2.5" blank cap to BS 336, in red plastic with chain, and in synthetic rubber
MULTIPURPOSE BRANCHPIPE — a dual-function nozzle adjustable to straight stream, fog or combined, in aluminium alloy with an on/off lever
- Model CCM 1.5", 9 mm orifice, 120 litres/min
- Model CCM 2.5", 12 mm orifice, 215 litres/min
Extinguisher cabinets
Single cabinet
Red-painted steel, 40 × 70 × 20 cm, clear glass front with rubber glazing seal and a push-latch lock. Holds one extinguisher.
Double cabinet
Red-painted steel, 60 × 70 × 20 cm, clear glass front with rubber seal and a key lock. Holds two extinguishers.
How to choose
If a location needs both dry chemical and CO₂, choose the double cabinet — nobody should have to go looking for the other type during an incident.
Hose cabinets
Hose rack type
80 × 100 × 30 cm, folded steel, with a door lock and a choice of safety or standard glass
Hose reel type
80 × 100 × 35 cm, folded steel, with a door lock and a choice of safety or standard glass
What is the difference?
A hose rack stores the hose folded, so it has to be pulled out fully before the water is turned on. A hose reel is wound on a drum and can be used immediately without unrolling all of it.
Extinguisher stands with signage
- Steel — painted red, with a three-step instruction sign mounted on top
- Stainless steel — 100 cm high, 20 cm base, with an instruction sign
- Thai–English instruction sign: pull the pin from the handle · hold the hose end and squeeze the handle · sweep the nozzle across the base of the fire
Stands matter more than people expect. An extinguisher left on the floor tends to get blocked by stock and cannot be found during a fire. A raised sign is visible from the other side of the room.
BSP EAGLE II turnout gear
The set comprises coat, trousers, helmet, boots, gloves and hood, in sizes M and L, in yellow or red
- Three-layer fabric — outer NOMEX III A · middle PTFE/NOMEX · inner quilted NOMEX/FR viscose
- Zip-out liner for easy removal and refitting; light at 7 kg
- Manufactured to NFPA 1991-2000
- The coat has two leather-trimmed side pockets, a chest radio pocket and two inner pockets
- The trousers have two side pockets, braces and double-layer reinforced knees
- 3M Triple Trim reflective banding on coat and trousers
Protective items in the set
Hood
NOMEX model 3018185, 18 in long, two-layer, with a 1/2 in elasticated edge for a close facial fit. To NFPA 1971-2007.
BSP fire helmet
Model 1500-2000F in thermoplastic, with a 4.5 in heat-resistant visor, a NOMEX neck shroud, adjustable sizing and a chin strap
FIREMAN VI gloves
Three-layer construction, resistant to steam and pathogen penetration, in sizes M and L
HAVIK 9687L boots
Synthetic rubber outer resistant to chemicals, heat and water, and non-flammable. Rubber pull-on tabs, dielectric to 18 kV, slip- and oil-resistant sole, steel toe cap and steel midsole. Sizes 42–46.
Safety signage
A sample of what is available — safety record boards · assembly point signs · safe condition signs · fire protection signs · warning signs
- Safety record board (Safety First) — records the date of the last accident, days worked since, the target and the best record. In 60×180 cm and 120×240 cm.
- Assembly point signs — in 30×60 · 40×50 · 40×60 · 40×80 · 50×90 · 50×100 · 50×120 · 60×120 · 80×120 cm
- Safe condition signs — exits, fire escapes and first aid points, in 20×30 · 30×45 · 37.5×45 cm
- Fire protection signs — extinguisher locations, hose points, fire blankets, alarm call points and do-not-use-lift-in-fire notices
- Warning signs — hazard symbols, in 20×30 and 30×45 cm
Assembly point and fire exit signage is the first thing a building inspector looks at. If you are preparing a submission, tell us in advance and we will select sizes and mounting positions that match what the inspector expects.
Request a Quote
Send us the sizes and quantities you need, or the building drawings. We work out the number of units and where they go, with a quote within one business day.
Request a Quote